|
DESCRIPTION - 5 finger protective glove - Elastomer (nitrile) coating on a textile liner. - Anatomical shape with curved fingers and fluted fingertips. - 3 lengths available: - 27 cm (10.5 in) protection of the wrist - 40 cm (16 in) protection of forearm - 4 sizes available: 8, 9, 10 and 11.
CHARACTERISTICS - Fine gauge 100% cotton jersey liner. - Assembly of the two parts by chain stitch. - Full dinaprene elastomer coating, a mix of several carboxylated nitrile rubbers formulated to enhance resistance to chemical and mechanical aggression. - Total thickness: 1.2 ± 0.1mm
PERFORMANCE - Particularly flexible with excellent dexterity. - Improved resistance to abrasion - Good chemical resistance (oils, greases, gasoline, petrol, alcohol, alkali, salts) and high resistance to solvents and paints. - Contact heat resistant: allows contact up to 150°C. - Certified in conformity with standard EN 420 (general requirements), EN 388 (mechanical hazards), EN 374 (chemical and microbiological hazards) and EN 407 (heat and fire hazards) by L'Institut Textile de France. - Manufactured under EC quality assurance system carried out by the ASQUAL body.
APPLICATIONS - Recommended for protection when handling aggressive products, in particular solvents, etc. for chemical plant, involving high temperatures up to 150°C. - For major risks. |
|
|||
|
||||
|
This glove complies with the essential requirements of European directive EEC/89/686 relative to personal protection equipment submitted to EC certificate of conformity issued by a notified laboratory, who certify conformity with the EN standards to which it responds and certify the performance levels obtained during tests, and manufactured under a EC quality assurance system carried out by a notified body. |
||||
|
EN 388 Abrasion Blade cut Tear Puncture |
4 1 2 2 |
EN 407 Contact Heat
|
||